News & events

In this section you will find all the latest news of the Danieli Group. Selecting the categories below, you can see News, Records, Start-ups, New Orders. 

13 / 101

TECH ADVANCES

2018, 19th November

ISIM

Innoval Spray Impact Model for the excellent profile control in hot rolling and flatness control in cold rolling

This model contains all the key understanding to design efficient spray cooling systems to cool rotating rolls in any rolling mill. The model takes into account direct cooling from the complex bank of sprays, interactions between neighbouring sprays and banks, and all other indirect cooling effects resulting from the flow of liquid around the roll surface.

 

The information it needs:

  • Geometry of mills and rolls;
  • Strip/slab geometry, temperature, metallurgical conditions;
  • Pass gauges, speeds, tensions;
  • Oil viscosity and additives used;
  • Engineering drawings showing existing headers or available space within the mill;
  • Heat input from the strip/slab, work roll speed, coolant medium, coolant flow/nozzle types, nozzle spacing and inclination, coolant pressure;

Historically, inadequate attention to work roll spray cooling configurations when rolling aluminium has significantly reduced flatness and profile controller performance.

Good dimensional quality from rolling mills depends not only on the control system, but also on the spray actuator. The work roll cooling needs to be recognised as a vital part of the rolling process.

In order to play this video, you will need to opt-in to functional cookies.
You can do so by followingand dragging the slider to the right
For more info: