METEC & 4th ESTAD 2019

24th - 28th June 2019 | Düsseldorf, Germany

7 / 10

The 4th European Steel Technology and Application Days (ESTAD) 2019 run in parallel with the METEC Trade Fair.

At this event you acquire the latest information on new ideas and developments as well as on the state-of-the-art in metallurgical process technologies for iron and steel production, steel materials and steel application.

CCD Congress Center Düsseldorf, Germany
Speakers open panel close panel
Matthias Meyn / Technologist BOF Gas Cleaning
June 25

17:00 / Room 14

BOF Gas Cleaning System Upgrades for Increased Efficiency and Off-Gas Quality
Ewout Tesselaar / Technologist Blast Furnace Ironmaking
June 26

10:00 / Room 1

Operational Experience with the Danieli Top Charging Unit at Zaporizhstal Blast Furnace No. 3
Reinoud van Laar / Senior Technology Manager Blast Furnace Ironmaking
June 25

14:40 / Room 17

Compact Blast Furnace Technology, Plant Engineering and Modernization
Rob van Opbergen / Manager Operational Assistance
June 26

13:40 / Room 1

Operational Assistance and Process Support: How to secure know–how and experience regarding special situations in blast furnace ironmaking
Peter Klut / Technologist Blast Furnace Gas Cleaning
June 27

10:00 / Room 3

Mitigating the Emission of Acid Pollutants from Dry Blast Furnace Gas Cleaning Plants
Jan Bak / Senior Sales Manager
June 25

14:00 / Room 17

Hot Blast System Development: Technology, Operations, Campaign Management
Günther Staudinger / , Senior Technology Manager BOF Converter Technology
June 25

15:30 / Room 1

Danieli Converter Technology: Joint Know–How Creating Unique Opportunities
Dario Pauluzzi / Senior Manager, Sales
June 27

11:00 / Room 21

Sustainable decrease of CO2 emissions in the steelmaking industry by means of the ENERGIRON Direct Reduction technology
Knigge Mathias / Senior Tech. Sales Manager Rolling Technologies
June 27

11:50 / Room 28

QSP - The most advanced thin slab technology
Marcel Van Reimersdahl / Senior Technology Manager, Rolling Technologies
June 26

11:20 / Room 26

The successful start-up of the first Danieli Universal Endless plant
Riccardo Conte & Robert Wolff / Process Engineer, Danieli Research Center/ Dipl.-Ing. Process Technology Metallurgy Lechler GmbH
June 26

17:00 / Room 17

Energy Efficiency in Secondary Cooling – new generation of hydraulic nozzles with increased water turn down ratio and cooling efficiency for slab casting processes
Ruediger Holz / Executive Vice President, Danieli Wean United
June 26

14:00 / Room 27

Danieli cold processing technology: Innovative approaches for New Lines and Upgrades
Aldo Tellatin / Vice President, Mi.Da. Micromills Danieli
June 27

13:40 / Room 28

MI.DA. - Latest developments in Endless Casting and Rolling of long products
Damiano Vinetti / Senior Manager, Sales
June 27

10:20 / Room 27

20+ euro/t savings by combining K-weld and K-spool technologies optimizing bar mill yield for the lowest OPEX
Marco Rinaldi / Senior Engineer, Process Technology Advisory & Commissioning
June 27

09:00 / Room 27

Bar mill dynamic pacing control
Antonello Mordeglia / Chief Executive Officer Member of the Board
June 26

15:40 / Room 21

First results of Q-ONE, innovative technology applied in the electric energy transfer to Electric Arc Furnace.
Enrico Plazzogna / Executive Vice President Sales & Marketing Dept.of Danieli Automation
June 27

13:00 / Room 26

09:00 / Room 26

1° Q-HEAT: Induction Heating system for long and flat products

2° The ever increasing role of automation in the development of the "Intelligent Plant" of the future

Davide Senesi / Manager, Direct Sales
June 27

11:0 / Room 17

Robotic applications for safety improvements in casting area
Alessandro Viviani / Vice President, Service
June 26

11:40 / Room 12

Advanced Service Team: a new strategic partner on total asset management
For more info: