Danieli Fröhling
The world’s first Flexible Cold Rolling technology that allows us to vary the roll gap during cold rolling, for producing tailor rolled blanks for the automotive industry.

Danieli Morgårdshammar
The first SCC Stand Core Concept super heavy-duty roll stand, the basis for the PSP Profile Sizing Process, a cost-cutting technology for producing medium/heavy sections, rails, and special profiles.

Danieli Breda
First Front-Loading extrusion press, with a total force of 32 MN with a billet diameter of 10”.

Danieli Fröhling
First CNC edge-trimming shear for an aluminum hot rolling mill with strip thickness up to 10 mm and 3,200 mm strip width.

Danieli Centro Maskin
The world first ECT™ - Endless Copper Tube plant.

Danieli Breda
Integrated steel forging plant complete of 35 M press, internal piercing centering device and punching arms.

Danieli Wean United
The world’s first successful Thin Slab Casting and Rolling of API X70 for Arctic applications (the most critical of HSLA steel grades for pipes).

Danieli Morgårdshammar
The world’s first combined application of EWR® and Spooling technologies, enhancing productivity, efficiency, product marketability, and achieving considerable savings in transformation costs.

Danieli Fröhling
Development of the “Super Slitter”, a solution that provides stiffness of about double value compared to previous slitting heads.

Danieli Arex
Passivated DRI with variable C-content to be recovered during EAF melting process.

Danieli Morgårdshammar
Development of the DSC Plus computer model for offline simulations, analysis and optimization of rolling parameters and product quality planning.

Danieli Breda
Stainless steel pipe extrusion plant with 35/10 MN extrusion press.

Danieli Centro Tube
Development and construction of the The FQM® - Fine Quality Mill, that combines the Retained Mandrel Mill process with the 3-roll technology for achieving higher-quality seamless tubes in a wider product range, with higher yield and reduced inventory and transformation costs.

Danieli Wean United
World first Thin Slab Casting of silicon steels, exceeding 3% Si content, at over 4 mpm.

Danieli Wean United
World first Thin Slab Casting plant to overcome the 3.0-Mtpy barrier (3.25 Mtpy with 2 casting strands).

Danieli Morgårdshammar
Development of the oil-film bearing laying head for vibrationfree rolling of wire rod at ultra high-speeds.

Danieli Wean United
Confined Jet Dryer system for stainless steel strip drying at the exit of the cold rolling mill.

Danieli Wean United
World first thin slab casting of 80-mm-thick slab cast at 8 mpm.

Danieli Morgårdshammar
Order for the world first ECR-Endless Casting and Rolling plant for commercial steels.

Danieli Fröhling
First new 6-High Rolling Mill for copper.

Danieli Wean United
Fast, flexible, and stable thin slab casting of extra-low and low-carbon steel grades: 70-mm-thick slab cast at 6.1 mpm.

Danieli Centro Met
Development of a continuous casting plant for round blooms of up to 700 mm in special engineering steels; the largest conticast section worldwide.