news & media

News & events

In this section you will find all the latest news of the Danieli Group. Selecting the categories below, you can see News, Records, Start-ups, New Orders. 

Henan Zhongfu relies again on Danieli

Henan Zhongfu relies again on Danieli

Henan Zhongfu Industrial Co. Ltd has contracted Danieli for the design, supply and installation supervision of a new high-speed edge trimming line. This new Danieli Fröhling line will process around 200,000 tpy of coils with strip thicknesses from 0.1 up to 0.8 mm at a maximum speed of 1500 mpm.
read more
Danieli Q-Robots for Nucor-Yamato Steel

Danieli Q-Robots for Nucor-Yamato Steel

Nucor-Yamato Steel (USA) has awarded Danieli with the order for two Q-Robots for the ladle furnaces that are in operation at Blytheville plant in Arkansas, USA. The two new Q-Robot samplers are part of the project to increase the automatization of operations and decrease the proximity of the operator to liquid steel.
read more
Danieli Q-Melt® automatic furnace boosts EAF performances at Kroman Çelik

Danieli Q-Melt® automatic furnace boosts EAF performances at Kroman Çelik

The Q-Melt automatic furnace is part of the “Danieli digital steelmaking concept” for EAF dynamic process control. It uses real-time process variables to perform automatic closed-loop control on the furnace chemical and electrical profiles.
read more
New Danieli aluminium plate stretcher and major rolling mill modernisation to ALRO

New Danieli aluminium plate stretcher and major rolling mill modernisation to ALRO

ALRO SA, part of Vimetco NV - one of the seven largest aluminium producers worldwide, has contracted Danieli for the supply of a new aluminium plate stretcher and major cold rolling mill modernization for its plant located Slatina, Romania.
read more
Diler relies on Danieli heat-treatment technology

Diler relies on Danieli heat-treatment technology

Diler Iron and Steel Industry and Trade Inc., a part of Diler Holding, has ordered a new bell-type annealing plant from Danieli Olivotto Ferrè, for heat treating coils in a protective atmosphere. This new plant, which will be installed in at Dilovası, Kocaeli (Turkey), is designed mainly for spheroidizing annealing of coiled rods with outside diameters ranging from 1,250 to 1,400 mm, wire diameters from 4.5 to 27 mm, and will accommodate charges stacked up to 1,900 mm high (for reference, charge weights will range from 1,650 to 2,350 kg).
read more
Henan Zhongfu aluminium slitting line in operation

Henan Zhongfu aluminium slitting line in operation

The new slitting line is processing coiled aluminium strip, 900-2,150 mm wide and between 0.10-1.0 mm thick, weighing up to 31 tons. It performs up to 40 slits, with minimum widths of 30 mm, at cutting speeds up to 800 m/min, primarily for alloys of series 1xxx, 3xxx, 5xxx, and 8xxx.
read more
JSC Ural Steel contracts Danieli for vacuum degasser revamping

JSC Ural Steel contracts Danieli for vacuum degasser revamping

JSC Ural Steel, part of the Metalloinvest Group, has awarded Danieli Centro Met the order to revamp the existing VD operating in Novotroitsk, Russia. This revamping will lead JSC Ural Steel to increase the productivity of its existing Twin-Tank, Twin-Cover VD, from 1.1 to 1.8 Mtpy of special steels, including rail and wheel grades.
read more
Steel Dynamics unveils its new Danieli Fata Hunter continuous coil coating line

Steel Dynamics unveils its new Danieli Fata Hunter continuous coil coating line

The ribbon cutting ceremony was held on March 29, 2017 in the presence of Mississippi Governor Phil Bryant. The new double-coat continuous coil coating line for steel supplied by Danieli Fata Hunter is a 600-fpm (183 mpm) line for the processing of cold rolled, galvanized, pickled hot band and Galvalume® steel coils with a maximum width of 72” (1,829 mm) and a maximum base metal thickness of .076” (1.93 mm). It has a yearly capacity of 250,000 tons of coated steel.
read more